|
Shipping
By UPS
|
|
|
Impact Sprinkler
|
It could be that the filter screen to the sprinkler is partially blocked.
Remove cap and lift internal parts out of the body.
Rinse parts in a pail of clean water. (Filter is on the bottom of the part that was lifted Read More...
Pop-up sprinklers require water pressure to “pop up.” Either a broken irrigation pipe or worn sprinkler wiper seals will cause loss of water pressure. To determine which is causing the problem, turn the sprinklers on, then pull up on any spr Read More...
Capping or removing a sprinkler is done differently depending on whether or not you live in an area that freezes and requires the irrigation system to be winterized. Winterizing your irrigation system involves draining or blowing the water out of the sy Read More...
The only lubricant Rain Bird recommends with any of their equipment is water! Any other lubricant will cause dirt and other debris to attract and stick to the different parts of the sprinkler. Read More...
This is generally because of a ruptured or torn diaphragm in one or more of the control valves. Be sure that the valve is not installed backwards. Make sure the solenoid plunger is not stuck or missing. Remove the solenoid and check for debris or a miss Read More...
There are two reasons why a pop-up spray will leak water when the water is off. The most common reason is called “Low Head Drainage” this is when the lowest head on the zone drains the water from the lateral piping out of the sprinkler. If i Read More...
|
|
|
|
|
|
Qty
|
|
Description
|
1 EA
|
|
Hunter PGP Blue Nozzle Set *NEW*
|
8 EA
|
|
Hunter SS-530 Side Strip Nozzle 5' x 30' Coverage
|
6 EA
|
|
Hunter RCS-515 Right Corner Strip 5' x 15' coverage
|
4 EA
|
|
Hunter LCS-515 Left Corner Strip 5' x 15' coverage
|
Go To Cart...
|
|
|
|
